KERAPOXY Adhesive Resin

Product Description

Kerapoxy is adhesive resin which is used for grouting and bonding of floor tiles. For grouting, its consumption depends on the size of joints. For bonding, it can be used for 2 kg to 4 kg for every m2 area. This two component adhesive resin does not make stone or ceramic tile surface slippery. Flooring treated with Kerapoxy can be used after 4 days of application. Accurate formulation, long lasting effect, non toxic content and advanced formulation method are the key aspects of this product. It takes around 1day to dry. Customers can avail it in 12 x 2 kg box, 5kg and 10 kg packaging units.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm).
TECHNICAL DATA:
Pot life of mix: 45 minutes.
Open time: 30 minutes.
Set to light foot traffic: approx. 24 hours.
Ready for use: 4 days. After 4 days surfaces may be exposed to chemicals.
Colours: 20.
Application: suitable trowel.
EMICODE: EC1 R Plus - very low emission.
Storage: 24 months.
Consumption:
- for grouting: according to the size of the joints;
- for bonding: 2-4 kg/m2
Packaging: 5 and 10 kg units and 12x2 kg boxes.